Water & wastewater treatment plants
captured properly.
Process basins, pump stations, blower rooms, and buried-to-grade connections captured together.
Why this building type gets scanned
A wastewater plant 3D scan covers what capital projects keep colliding with: basin geometry, channel inverts, pump station interiors, blower and MCC rooms, and the pipe galleries connecting them. Aerial mapping adds the site, basins, and access roads in the same control network.
- Water treatment plant scan data supports upgrades where original drawings predate three expansions.
- Confined and wet areas are expensive to re-measure; capture once with documented coverage.
- Public procurement expects existing conditions drawings that can be verified.
- Site topographic drone survey ties basins, yards, and outfalls into the same model.
How a typical project runs
We walk the site or review drawings and photos, agree the areas and density, and set control. Field work is scheduled around your operations — nights, weekends, or planned outage windows where required. After registration and QA, the deliverable set is produced and reviewed with your team so the files are usable on day one. The full workflow is on our process page.
The deliverable set follows from the questions above. That comes out as capture of the process buildings and pipe galleries, site mapping across basins and access roads, and an existing conditions set a public procurement can verify.
- Basins, channels, and weirs
- Pump stations and wet wells
- Blower, MCC, and control rooms
- Pipe galleries and utility corridors
- Chemical and dewatering buildings
- Site, access roads, and outfalls
- Registered point cloud
- Existing conditions drawing set
- Process building BIM model
- Site orthomosaic, DSM and contours
Where treatment plant capture comes up
Almost every municipality in the region owns process infrastructure older than its drawing archive, and public capital work has to show existing conditions somebody can verify.
The New York side of the service area adds pump station and wet well capture in Babylon, basin and channel surveys in Binghamton, blower and MCC room documentation in Brookhaven, plant site mapping in Clarkstown, and treatment plant scanning in Greece. In New Jersey that covers basin and channel surveys in Brick, blower and MCC room documentation in Hoboken, plant site mapping in Lakewood, treatment plant scanning in Old Bridge, and pump station and wet well capture in Trenton. Connecticut coverage includes blower and MCC room documentation in Hamden, plant site mapping in Torrington, treatment plant scanning in West Hartford, pump station and wet well capture in Bristol, and basin and channel surveys in Norwalk.
Make the invisible
measurable.
Tell us what is inside, outside, and on the line. We will help you scope the capture and the handoff — in New York, New Jersey, or Connecticut.
Request a scan quote